Crowbar

Some, or most, of this page's contents was copied from The Blockheads Wiki at theblockheadswiki.com.

This article is a stub. You can help The Blockheads Wiki by expanding it.

Some, or most, of this page's contents was copied from The Blockheads Wiki at theblockheadswiki.com.

Crowbar
File:Crowbar Big.png
Category	Tool
Use	Rail
Location/Made On	Train Yard
Tool
Needs	2 Steel Ingot
Stackable	Yes (99)

"Easily remove rail."

A crowbar is a tool that is used to remove placed rails.

Where Found

A level 5 tool bench or a train yard can be used to craft two steel ingots into a crowbar.

Some, or most, of this page's contents was copied from The Blockheads Wiki at theblockheadswiki.com.

Crowbar Location Input Item 1 Input Item 2 Input Item 3 Input Item 4 Crafted Output Tool Bench File:Steel Ingot Icon.png + + + = File:Crowbar Icon.png Steel Ingot [[]] [[]] [[]] Crowbar Quantity 2 {{{Qty2}}} {{{Qty3}}} {{{Qty4}}} 1

Rush Cost 8 TC Double-Time 4 TC

Using

Applying a crowbar to an already placed section of rail will cause the rail to lift away and be sent to the acting Blockhead's inventory. Rail can also be removed by destroying all of its supporting blocks. A crowbar can be used for an unlimited time to remove rail, as a duration bar will not appear. If used on anything else, it will show a duration bar.